|
Water & Wastewater Program |
|
POLICIES The DEQ Water and Wastewater Program is updating the collection of policies for procedures and design standards. The policies will be posted as they are updated. Chapter 11 Design and Construction Standards for Wastewater Treatment Plants Policy 13.8.1 - Reclamation of abandoned wastewater treatment or disposal facilities Policy 13.9.3 - Spirolite pipe, ASTM F-894 Policy 13.9.7 - Water and sewer line separation Policy 13.9.8 - Aerated lagoons and design flows for sewers Policy 13.9.9 - Wastewater service connections, permit required Policy 13.9.11 - Flow-fill encasement Policy 13.9.12 - Polyethylene (PE) pipe Policy 13.9.13 - Very Low Slope Sewer Variance Policy 13.35.1 - Lot sizes in subdivisions Policy 13.41.8 - Presby's Advanced Enviro-septic ("AES") Systems Chapter 12 Design and Construction Standards for Public Water Supplies Policy 14.5.1 - Procedures for evaluating and tracking variances to minimum design standards for water and wastewater systems Policy 14.13.2 - Finished Water Storage Tank - Drain Line and Overflow Air Gap to Storm Drain Requirements Policy 14.13.3 - Finished Water Storage Policy 14.14.3 - Approval of "Insituform" for potable water main rehabilitation Policy 14.14.4 - Cross-connection controls: Dual Checks and Thermal Expansion Policy 14.14.6 - Cross-connection control for Stock Water Points Policy 14.14.10 - Water and sewer line separation Policy 14.14.12 - AWWA-M14, Recommended Practice for Backflow Prevention and Cross-Connection Control Policy 14.14.13 - Asbestos-cement pipe Policy 14.14.14 - Flow-fill encasement Policy 14.14.16 - RV Park and Mobile Home water service connections Policy 14.14.17 - Subsurface drains allowed for blow-off hydrants Policy 14.14.18 - Modification of Frost Free Hydrants for Backflow Prevention |